Honda Archives - Page 2 of 10

2020 Honda CR-V
Mileage
42,793
Service Date
10/10/2025
Services Performed
ENGINE OIL AND FILTER CHANGE – Drain old engine oil, replace oil filter, and refill with manufacturer-recommended oil to ensure optimal engine performance and longevity. TIRE INSPECTION AND INFLATION CHECK – Inspect all tires for wear, damage, and proper tread depth. Adjust tire pressure to the manufacturer’s recommended PSI for even wear and safe handling. BRAKE COMPONENT INSPECTION – Examine brake pads, rotors, and calipers for wear or damage. Check brake fluid
REMOVED AND REPLACED THE ENGINE AIR FILTER. THE OLD FILTER WAS DIRTY AND CLOGGED, WHICH CAN RESTRICT AIRFLOW TO THE ENGINE AND AFFECT PERFORMANCE, FUEL EFFICIENCY, AND EMISSIONS. INSTALLED A NEW FILTER TO HELP ENSURE OPTIMAL AIRFLOW, IMPROVE ENGINE EFFICIENCY, AND MAINTAIN PROPER COMBUSTION.
REMOVED AND REPLACED THE CABIN AIR FILTER. THE OLD FILTER WAS DIRTY AND RESTRICTED, WHICH CAN REDUCE AIRFLOW AND AFFECT THE EFFICIENCY OF THE HVAC SYSTEM. INSTALLED A NEW FILTER TO HELP MAINTAIN CLEAN AIR INSIDE THE VEHICLE AND ENSURE PROPER VENTILATION PERFORMANCE.
PERFORM A TIRE ROTATION BY REPOSITIONING EACH TIRE ACCORDING TO THE RECOMMENDED ROTATION PATTERN TO ENSURE EVEN TREAD WEAR. INSPECT TIRES FOR SIGNS OF UNEVEN WEAR, DAMAGE, OR ABNORMAL WEAR PATTERNS. CHECK TIRE PRESSURE AND ADJUST TO MANUFACTURER SPECIFICATIONS. VERIFY WHEEL TORQUE TO ENSURE PROPER INSTALLATION. CONDUCT A FINAL INSPECTION TO CONFIRM SAFE AND OPTIMAL TIRE PERFORMANCE.
Teri M. gave our service a 5 star review on 10/11/2025
2012 Honda Pilot
Mileage
125,227
Service Date
9/17/2025
Services Performed
REMOVE AND REPLACE DRIVE BELT TENSIONER DUE TO WEAR. ENSURE PROPER TENSION AND ALIGNMENT. START ENGINE AND INSPECT FOR ANY NOISES OR IRREGULAR MOVEMENT. VERIFY THAT THE TENSIONER IS OPERATING CORRECTLY AND THAT ALL AFFECTED SYSTEMS ARE FUNCTIONING AS INTENDED.
RALPH S. gave our service a 5 star review on 9/19/2025
2016 Honda Pilot
Mileage
85,866
Service Date
9/2/2025
Services Performed
DURING A THOROUGH SUSPENSION AND VEHICLE DYNAMICS INSPECTION, ROAD TESTING REVEALED CLUNKING AND UNUSUAL MOVEMENT IN THE FRONT SUSPENSION. UPON LIFT INSPECTION, THE FRONT CONTROL ARMS WERE FOUND TO HAVE EXCESSIVE PLAY IN THE BALL JOINTS AND BUSHINGS, INDICATING THEY ARE WORN AND REQUIRE REPLACEMENT. FURTHER INSPECTION OF THE FRONT STRUT ASSEMBLIES, INCLUDING STRUT MOUNTS, SHOWED SIGNS OF WEAR AND DETERIORATION, CONTRIBUTING TO THE CLUNKING AND REDUCED RIDE QUALITY; THESE COMPONENTS WILL NEED TO BE REPLACED. ADDITIONALLY, ROAD TESTING AND VIBRATION ANALYSIS REVEALED VIBRATIONS ISOLATED TO THE RIGHT ENGINE MOUNT. INSPECTION CONFIRMED THAT THE RIGHT ENGINE MOUNT IS WORN AND DEFORMED, REQUIRING REPLACEMENT TO RESTORE PROPER ENGINE STABILITY AND REDUCE VIBRATION TRANSMISSION INTO THE CABIN.
REMOVE AND REPLACE FRONT LOWER CONTROL ARMS. INSPECTED EXISTING CONTROL ARMS AND FOUND EXCESSIVE WEAR IN BALL JOINTS AND BUSHINGS, CONTRIBUTING TO CLUNKING AND REDUCED SUSPENSION PERFORMANCE. INSTALLED NEW CONTROL ARMS, ENSURING PROPER TORQUE SPECIFICATIONS AND ALIGNMENT. ROAD TESTED VEHICLE TO CONFIRM RESTORED SUSPENSION FUNCTION AND ELIMINATION OF NOISE.
REMOVE AND REPLACE FRONT STRUTS AND STRUT MOUNTS. INSPECTED EXISTING STRUT ASSEMBLIES AND STRUT MOUNTS AND FOUND SIGNS OF WEAR AND DETERIORATION, CONTRIBUTING TO CLUNKING, REDUCED RIDE QUALITY, AND IMPAIRED SUSPENSION PERFORMANCE. REMOVED OLD STRUT ASSEMBLIES AND MOUNTS, INSTALLED NEW STRUTS AND STRUT MOUNTS TO FACTORY SPECIFICATIONS, ENSURING PROPER TORQUE AND ALIGNMENT. ROAD TESTED VEHICLE AFTER INSTALLATION TO VERIFY IMPROVED RIDE QUALITY, HANDLING, AND ELIMINATION OF NOISE.
REMOVE AND REPLACE FRONT SIDE ENGINE MOUNT. INSPECTED EXISTING ENGINE MOUNT AND FOUND SIGNS OF WEAR AND DETERIORATION, RESULTING IN EXCESSIVE ENGINE VIBRATION TRANSMITTED TO THE CABIN. REMOVED THE OLD ENGINE MOUNT AND INSTALLED A NEW ONE, ENSURING PROPER ALIGNMENT AND TORQUE SPECIFICATIONS. ROAD TESTED VEHICLE AFTER INSTALLATION TO CONFIRM ELIMINATION OF VIBRATIONS AND RESTORED ENGINE STABILITY.
PERFORM WHEEL ALIGNMENT TO ADJUST CAMBER, CASTER, AND TOE ANGLES TO MANUFACTURER SPECIFICATIONS. ENSURE PROPER STEERING WHEEL POSITION AND VEHICLE HANDLING. COMPLETE FINAL INSPECTION AND ROAD TEST TO VERIFY ALIGNMENT ACCURACY.
ALFRED B. gave our service a 5 star review on 9/2/2025
2017 Honda Accord
Mileage
166,725
Service Date
8/30/2025
Services Performed
VEHICLE SERVICE: – CHANGE ENGINE OIL AND FILTER – REPLACE ENGINE AIR FILTER – TIRE INFLATION CHECK – BRAKE COMPONENT INSPECTION – ALL FLUID LEVEL CHECK – RESET MAINTENCE COUNTER
REMOVED AND REPLACED THE ENGINE AIR FILTER. THE OLD FILTER WAS DIRTY AND CLOGGED, WHICH CAN RESTRICT AIRFLOW TO THE ENGINE AND AFFECT PERFORMANCE, FUEL EFFICIENCY, AND EMISSIONS. INSTALLED A NEW FILTER TO HELP ENSURE OPTIMAL AIRFLOW, IMPROVE ENGINE EFFICIENCY, AND MAINTAIN PROPER COMBUSTION.
REMOVED AND REPLACED THE CABIN AIR FILTER. THE OLD FILTER WAS DIRTY AND RESTRICTED, WHICH CAN REDUCE AIRFLOW AND AFFECT THE EFFICIENCY OF THE HVAC SYSTEM. INSTALLED A NEW FILTER TO HELP MAINTAIN CLEAN AIR INSIDE THE VEHICLE AND ENSURE PROPER VENTILATION PERFORMANCE.
STEVE Y. gave our service a 5 star review on 8/30/2025
2011 Honda Accord
Mileage
72,063
Service Date
8/12/2025
Services Performed
REMOVE REAR BRAKE ROTORS REPLACE REAR BRAKE PADS REPLACE REAR BRAKE ROTORS ASSEMBLE BACK TOGETHER
RAJ S. gave our service a 5 star review on 8/12/2025
2014 Honda Accord
Mileage
119,161
Service Date
8/7/2025
Services Performed
ENGINE OIL AND FILTER CHANGE – Drain old engine oil, replace oil filter, and refill with manufacturer-recommended oil to ensure optimal engine performance and longevity. TIRE INSPECTION AND INFLATION CHECK – Inspect all tires for wear, damage, and proper tread depth. Adjust tire pressure to the manufacturer’s recommended PSI for even wear and safe handling. BRAKE COMPONENT INSPECTION – Examine brake pads, rotors, and calipers for wear or damage. Check brake fluid
JANETTE T. gave our service a 5 star review on 8/7/2025
2018 Honda CR-V
Mileage
106,745
Service Date
7/30/2025
Services Performed
ENGINE OIL AND FILTER CHANGE – Drain old engine oil, replace oil filter, and refill with manufacturer-recommended oil to ensure optimal engine performance and longevity. TIRE INSPECTION AND INFLATION CHECK – Inspect all tires for wear, damage, and proper tread depth. Adjust tire pressure to the manufacturer’s recommended PSI for even wear and safe handling. BRAKE COMPONENT INSPECTION – Examine brake pads, rotors, and calipers for wear or damage. Check brake fluid
JESSICA S. gave our service a 5 star review on 7/30/2025
2017 Honda Civic
Mileage
62,606
Service Date
7/15/2025
Services Performed
CONFIRMED CUSTOMER CONCERN AND FOUND THE UNDERCOVER DRAGGING. THE COVER IS COMPOSED OF BOTH ALUMINUM AND PLASTIC, AND THE CUSTOMER REQUESTED COMPLETE REMOVAL. REMOVED THE DAMAGED COVER AND SECURED ALL NECESSARY COMPONENTS TO ENSURE NOTHING ELSE IS LOOSE OR DRAGGING. MADE ALL NECESSARY ADJUSTMENTS TO ENSURE SAFE AND PROPER DRIVABILITY.
ADRIANA C. gave our service a 5 star review on 7/15/2025
2014 Honda Accord
Mileage
47,980
Service Date
7/2/2025
Services Performed
ENGINE OIL AND FILTER CHANGE – Drain old engine oil, replace oil filter, and refill with manufacturer-recommended oil to ensure optimal engine performance and longevity. TIRE INSPECTION AND INFLATION CHECK – Inspect all tires for wear, damage, and proper tread depth. Adjust tire pressure to the manufacturer’s recommended PSI for even wear and safe handling. BRAKE COMPONENT INSPECTION – Examine brake pads, rotors, and calipers for wear or damage. Check brake fluid
RIMA M. gave our service a 5 star review on 7/5/2025
2017 Honda Ridgeline
Mileage
115,972
Service Date
7/2/2025
Services Performed
ENGINE OIL AND FILTER CHANGE – Drain old engine oil, replace oil filter, and refill with manufacturer-recommended oil to ensure optimal engine performance and longevity. TIRE INSPECTION AND INFLATION CHECK – Inspect all tires for wear, damage, and proper tread depth. Adjust tire pressure to the manufacturer’s recommended PSI for even wear and safe handling. BRAKE COMPONENT INSPECTION – Examine brake pads, rotors, and calipers for wear or damage. Check brake fluid
REMOVED AND REPLACED THE ENGINE AIR FILTER. THE OLD FILTER WAS DIRTY AND CLOGGED, WHICH CAN RESTRICT AIRFLOW TO THE ENGINE AND AFFECT PERFORMANCE, FUEL EFFICIENCY, AND EMISSIONS. INSTALLED A NEW FILTER TO HELP ENSURE OPTIMAL AIRFLOW, IMPROVE ENGINE EFFICIENCY, AND MAINTAIN PROPER COMBUSTION.
REMOVED AND REPLACED THE CABIN AIR FILTER. THE OLD FILTER WAS DIRTY AND RESTRICTED, WHICH CAN REDUCE AIRFLOW AND AFFECT THE EFFICIENCY OF THE HVAC SYSTEM. INSTALLED A NEW FILTER TO HELP MAINTAIN CLEAN AIR INSIDE THE VEHICLE AND ENSURE PROPER VENTILATION PERFORMANCE.
PERFORM A TIRE ROTATION BY REPOSITIONING EACH TIRE ACCORDING TO THE RECOMMENDED ROTATION PATTERN TO ENSURE EVEN TREAD WEAR. INSPECT TIRES FOR SIGNS OF UNEVEN WEAR, DAMAGE, OR ABNORMAL WEAR PATTERNS. CHECK TIRE PRESSURE AND ADJUST TO MANUFACTURER SPECIFICATIONS. VERIFY WHEEL TORQUE TO ENSURE PROPER INSTALLATION. CONDUCT A FINAL INSPECTION TO CONFIRM SAFE AND OPTIMAL TIRE PERFORMANCE.
REMOVE ALL NECESSARY COMPONENTS TO GAIN FULL ACCESS TO THE TIMING BELT SYSTEM, INCLUDING ENGINE COVERS, BELTS, AND ANY OBSTRUCTING BRACKETS OR ACCESSORIES. REMOVE AND REPLACE ALL TIMING BELT KIT COMPONENTS, INCLUDING THE TIMING BELT, TENSIONER, AND IDLER PULLEYS. ALSO REMOVE AND REPLACE THE WATER PUMP ALONG WITH THE WATER PUMP GASKET TO PREVENT FUTURE LEAKS. INSTALL A NEW DRIVE BELT, AS THE OLD ONE WAS BEGINNING TO DETACH AND SHOW SIGNS OF WEAR. REASSEMBLE ALL REMOVED COMPONENTS, ENSURING PROPER ALIGNMENT AND TORQUE SPECIFICATIONS ARE FOLLOWED. REFILL THE COOLING SYSTEM WITH NEW ANTIFREEZE/COOLANT AND BLEED THE SYSTEM TO REMOVE ANY AIR POCKETS. PERFORM A FULL FUNCTION TEST TO VERIFY THAT ALL AFFECTED SYSTEMS ARE OPERATING PROPERLY AND THAT THERE ARE NO LEAKS OR WARNING LIGHTS. FINALIZE WITH A ROAD TEST IF NECESSARY TO CONFIRM PROPER ENGINE PERFORMANCE.
WILL J. gave our service a 5 star review on 7/4/2025

Honda

We Service and Repair all Honda cars