2006 Toyota Tacoma
Mileage
122,347
Service Date
8/31/2022
Services Performed
- REMOVE ALL NECESSARY COMPONENTS. REMOVE AXLE ASSEMBLY COMPONENTS AND WHEEL HUB ASSEMBLY IN ORDER TO REMOVE THE OTHER END OF THE BROKEN SENSOR INSIDE. THIS WAS THE ONLY WAY TO EXTRACT THE PLASTIC PIECE. ASSEMBLE TOGETHER AND MAKE ALL NECESSARY ADJUSTMENTS.
- Connected a scan tool and found code: C0200 – Right Front Wheel Speed Sensor Circuit Malfunction. Connected a Scan tool to the DLC3 connector and test drove the vehicle while observing the graph data from the R/F wheel speed sensor. There was no data output from the sensor. Used a handheld multi-meter and checked for power at the #2 terminal at the sensor. There was none. Unplugged the sensor and tested the wiring harness from the sensor to the skid control ECU and found that the resistance was infinite. There was an open in the wiring harness. Physically examined the wire harness and found that it was damaged in a few places, possibly from rodents. REMOVE ALL NECESSARY COMPONENTS. REMOVE AND REPLACE ABS SPEED SENSOR WIRING HARNESS. ASSEMBLE TOGETHER AND MAKE ALL NECESSARY ADJUSTMENTS. RSET ECU, TEST ALL AFFECTED AREAS.
JIMMY N. gave our service a 5 star review on 9/1/2022
