2010 Ford Edge
Mileage
208,391
Service Date
6/2/2022
Services Performed
- Observed the engine coolant temperature gauge and found the engine coolant temperature exceeded the allowable specifications. Connected a scan tool and found code P0480 – Fan 1 Control Circuit. Inspected the engine coolant level and found it eas at the proper level. Key on, used the scan tool to command the engine cooling fan relay on and observed the relay made an audible click, but the engine cooling fan did not function. Performed a visual inspection of the fuses and relays, but found no concerns. Inspected the engine cooling fan wiring harness and found no evidence of any damage. Disconnected the engine cooling fan harness connector, visually inspected the connector and found no apparent concerns. With the engine cooling fan harness connector disconnected, rotated the engine cooling fan by hand and found it freely rotated. Connected a multi-meter to the engine cooling fan harness connector to test for voltage and ground while the scan tool was used to command the engine cooling fan on. Found both voltage and ground were present. Attached fused jumper wires across the engine cooling fan terminals, applied voltage and ground and found the engine cooling fan did not operate. The results of these tests verified the engine cooling fan was faulty.
- [DURING REPAIR ALSO FIX DAMAGED COOLING FAN WIRING HARNESS CONNECTOR]
JIM B. gave our service a 5 star review on 6/2/2022
