Confirmed the customer's complaint and found the HVAC blower motor was inoperative. Inspected the HVAC blower motor wiring harness and found no faults. Used a multi-meter to check for voltage at the HVAC blower motor and found voltage was present. Connected a test light in place of the HVAC blower motor, moved the blower motor switch throughout its range, and found the test light illuminated. This indicated the HVAC blower motor wiring and control circuits were functional. Used a set of fused jumper wires to apply voltage and ground to the HVAC blower motor and found the motor was inoperative. These test results verified the HVAC blower motor was faulty. REMOVE ALL NECESSARY COMPONENTS TO GAIN ACCESS TO THE BLOWER MOTOR. CAREFULLY REMOVE AND REPLACE THE BLOWER MOTOR WITH A NEW UNIT TO ENSURE PROPER FUNCTIONALITY OF THE VEHICLE'S CLIMATE CONTROL SYSTEM. REASSEMBLE ALL REMOVED COMPONENTS, VERIFYING PROPER FITMENT AND SECURE CONNECTIONS. MAKE ALL NECESSARY ADJUSTMENTS TO ENSURE OPTIMAL PERFORMANCE. PERFORM A SYSTEM TEST TO CONFIRM THE BLOWER MOTOR IS OPERATING CORRECTLY AND THAT ALL AFFECTED AREAS ARE FUNCTIONING AS INTENDED.
MORGAN M. gave our service a 5 star review on 3/24/2025
REMOVE AND REPLACE THE SPARK PLUGS, ENSURING THAT EACH PLUG IS INSTALLED TO MANUFACTURER SPECIFICATIONS. REASSEMBLE ALL COMPONENTS AND MAKE THE NECESSARY ADJUSTMENTS TO ENSURE OPTIMAL PERFORMANCE. TEST ALL AFFECTED AREAS TO VERIFY THAT THE VEHICLE IS OPERATING CORRECTLY.
REMOVE FRONT BRAKE ROTORS REPLACE FRONT BRAKE PADS ASSEMBLE BACK TOGETHER
RESURFACE FRONT BRAKE ROTORS
REMOVE REAR BRAKE ROTORS REPLACE REAR BRAKE PADS REPLACE REAR BRAKE ROTORS ASSEMBLE BACK TOGETHER
AUSTIN B. gave our service a 5 star review on 3/20/2025
BATTERY SERVICE: CLEAN CORRODED BATTERY. REMOVE AND REPLACE BATTERY. MAKE SURE ALL WIRES ARE INSERTED INTO PROPER CAVITIES. RE-ASSEMBLE BACK TOGETHER. CONNECT BATTERY. MAKE SURE ALL OTHER WIRES ARE HARNESSED PROPERLY. TEST ALL AFFECTED SYSTEM.
CALIFORNIA BATTERY FEE
GWEN E. gave our service a 5 star review on 1/24/2025
REMOVE ALL NECESSARY COMPONENTS ON THE FRONT RIGHT SIDE TO ACCESS THE HEADLIGHT BULB. REPLACE THE RIGHT-SIDE HEADLIGHT BULB WITH THE PROVIDED UNIT. REASSEMBLE ALL COMPONENTS, MAKE ANY REQUIRED ADJUSTMENTS, AND TEST ALL AFFECTED AREAS TO ENSURE PROPER FUNCTIONALITY.
SCOTT T. gave our service a 5 star review on 1/13/2025
Performed a visual inspection of the air conditioning system components, and found no obvious faults. Connected air conditioning refrigerant manifold gauges to the refrigerant high and low service ports. Started the engine and switched the air conditioning to the max position with the blower motor fan on high. The pressures observed on the manifold gauges were within the specified value, which indicated a proper refrigerant charge. Used an electronic leak detector, inspected for refrigerant leaks, and found none. All necessary components in the AC system are functioning normally. However, based on the symptoms described by the customer, we believe it is possible that the blower motor or the blower motor resistor stops working once it becomes too hot after prolonged use. While replacing these two components may not definitively resolve the issue, it is a recommended initial step. The customer has agreed to proceed with this replacement, understanding the associated risks.
REMOVE ALL NECESSARY COMPONENTS TO GAIN ACCESS INSIDE THE CABIN OF THE CAR UNDERNEATH THE DASH BY THE GLOVE COMPARTMENTS. REMOVE AND REPLACE THE BLOWER MOTOR AND BLOWER MOTOR REGULATOR. REASSEMBLE AND MAKE ALL NECESSARY ADJUSTMENTS. TEST ALL AFFECTED SYSTEMS.
KEN T. gave our service a 5 star review on 7/11/2024
REMOVE AND REPLACE CABIN AIR FILTER. REMOVE AND REPLACE ENGINE AIR FILTER. CLEAN AIR FILTER HOUSING AND AIR INTAKE HOSE. ASSEMBLE TOGETHER AND MAKE ALL NECESSARY ADJUSTMENTS.
REMOVE ALL NECESSARY COMPONENTS IN THE STEERING COLUMN. REMOVE AND REPLACE STEERING SHAFT COUPLING. ASSEMBLE TOGETHER AND MAKE ALL NECESSARY ADJUSTMENTS. TEST ALL AFFECTED AREAS.
STEPHEN G. gave our service a 5 star review on 12/7/2023